| Track span of the machine tool (mm) |
HNC 2500G: Track span: 2500mm. Effective 2000mm HNC 3000G: Track span: 3000mm. Effective 2500mm |
||
| Track length of machine tool (mm) |
4000MM |
8000 |
|
| Effective cutting length max (change when add torch) |
3000mm |
7000mm |
|
|
Oxy-fuel torch |
1set |
||
|
Adjustor |
1set |
||
|
Auto ignition |
1set |
||
|
Plasma torch |
1set （togerther with Oxy-gas torch） |
||
|
AUTO HEIGHT CONTROL(THC) |
1set |
||
|
Add separated plasma or oxy-gas torch: |
1 set (can add plasma or oxy-gas lift): optional: add 810 usd |
||
|
PLASMA SOURCE |
NO |
||
|
Cutting gas |
Oxygen, acetylene/propane/air |
||
|
Transmission mode |
Cross: Crawler-type; vertical: Chaining |
||
|
Driven approach |
Double |
||
|
System controller |
CCM3 |
||
|
Stepdriver |
Change to Servo motor: add 1730 usd |
||
|
Relay |
OMRON-Italy |
||
|
Nesting software |
Sigmanest |
||
|
Stepping motor |
2H57M(China) |
||
|
Workbase(include the table middle) |
NO |
||
2.Technical index
|
|
Flame cutting thickness |
6-150mm |
|
|
The elevation stroke of lifter(mm) |
≤200mm |
|
|
Working Speed |
0-6000mm/min |
|
|
Maximum air-way speed |
8000mm/min |
|
|
Setting speed error |
≤±5％ |
3. Requirement of working environment
|
1. |
Power/frequency |
220v±10%/50Hz |
|
2. |
Input power |
0.4KW |
|
3. |
Oxygen pressure |
0.4-1.0ＭPa |
|
4. |
Acetylene pressure |
0.05-0.1ＭPa |
|
5. |
Temperature of working condition |
0-50℃ |
|
6. |
Relative humidity |
< 90%, non-condensation |
|
7. |
The surrounding environment |
Airy, no greatly impact |
Đánh giá
Chưa có đánh giá nào.